BHSBC - MOLD RELEASE SPRAY (OXY DENTAL)

Product Identification

Product ID:MOLD RELEASE SPRAY (OXY DENTAL)
MSDS Date:09/01/1986
FSC:6520
NIIN:00F010205
MSDS Number: BHSBC

Responsible Party
E & D DENTAL MANUFACTURING CO.
6 HOFFMAN P1
HILLSIDE, NJ 07205

Emergency Phone: (201) 372-1298

Info Phone: (201) 372-1298

Cage: OB7F7

Contractor
E & D DENTAL MANUFACTURING
HILLSIDE, NJ 07205

Telephone: (201) 372-1298

Cage: OB7F7

Ingredients

POLYDIMETHYLSILOXONE


BUTANE

CAS: 106-97-8

RTECS: EJ4200000

OSHA PEL 800 PPM

ACGIH TLV: 800 PPM; 9192


PROPANE

CAS: 74-98-6

RTECS: TX2275000

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT; 9192

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DEPLETES OXYGEN SUPPLY TO
LUNGS, DIZZINESS & LACK OF COORDINATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DEPLETES OXYGEN SUPPLY TO LUNGS,
DIZZINESS & LACK OF COORDINATION.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: WASH EXPOSED AREA
W/SOAP & WATER. INGESTION/EYES: CONSULT PHYSICIAN.

Fire Fighting

Flash Point:0F
Lower Limits:1.6
Upper Limits:8.4
Extinguishing Media:CO2
Fire Fighting Procedures:REMOV SOURCE OF IGNITION.
Unusual Fire/Explosion Hazard:HIGHLY EXPLOSIVE GAS WHEN ACCUMULATED IN
CONFINED AREA AND SUBJECTED TO IGNITION SOURCE.

Accidental Release

Spill Release Procedures:GASES WILL EVAPORATE. NON VOLATILE RESIDUE CAN
BE CLEANED UPIN USUAL MANNER. WIPE UP & DISPOSE.

Handling

Handling and Storage Precautions:CONTENTS ARE UNDER PRESSURE. DON'T
PUNCTURE COTAINER OR DISPOSE IN INCINERATE.

Exposure Controls

Respiratory Protection:NONE IS REQUIRED UNDER NORMAL USE.
Ventilation:NORMAL
Protective Gloves:NOT REQUIRED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE REQUIRED
Work Hygienic Practices:WASH EXPOSED AREAS AFTER USING.
Supplemental Safety and Health

Chemical Properties

Vapor Density:1.0
Solubility in Water:NOT SOLUBLE
Appearance and Odor:COLORLESS GAS UNDER PRESSURE

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:OPEN FLAMES & SPARKS
Hazardous Decomposition Products:NONE

Disposal

Waste Disposal Methods:EMPTY CONTAINER CAN BE DISPOSED AS NORMAL TRASH.
DON'T PUNCTURE CONTAINER OR DISPOSE IN INCINERATOR.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.